| Input power supply | 3 phase 380V to 480V ±10%, 50/60Hz ±5% |
| Converter type | IGBT rectifier with built-in LCL line filter
|
| Input low harmonic | Less than 3% in nominal situation |
| Inverter type | IGBTs |
| Input current protection | Circuit breaker |
| Input surge suppression | IEC test classification / EN type: II/T2 |
| Maximum continuous voltage: 350V(L-PE) |
| ISCCR: 50kA (max.200A gG) |
| Voltage protection level: 1500V |
| In: 20kA 8/20 μs |
| Imax: 40kA 8/20 μs |
| Output voltage | The same as power supply |
| Output frequency | 0 Hz to ±598Hz |
| Motor control | Direct Torque Control (DTC) |
| Motor technology | Induction Motor (IM) and Permanent Magnet Motor (PMM) |
| Efficiency | >97% at full load |
| Power factor | 0.98 at nominal load |
| Handling regenerative energy | Returned back to the VFD and distirbuted forward to the supply network |
| Overload rating | 150% for 1min/5min |
| Certifications | ISO9001, ISO14001 |
| Enclosure rating | IP66 [ equivalent to NEMA4 ] |
| Cooling method | Forced air cooling |
| Altitude | 0 to 1000m without derating |
| Ambient operating temperature | -20 ℃ to 50 ℃ |
| Relative humidity | 20% to 95% maximum(noncondensing) |
| H2S protection | Conformal-coated PCBs & bus bars |
| Material | Carbon steel, the thickness is 2.5mm |
| Power cable incoming and outgoing | From the bottom of the VFD |
| Operating interface | ABB control panel, 7” touched screen panel is option |
| Analog inputs/outputs | 2 programmable analog inputs and expandable |
| 2 programmable analog outputs and expandable |
| Digital inputs/outputs | 6 programmable digital inputs |
| 2 digital inputs/outputs |
| 1 digital input interlock |
| 3 programmable relay outputs |
